Removing the Peugeot 306 Headliner

DISASSEMBLY - REPLACEMENT CEILING

1 - REMOVAL

Unscrew:

sun visor (1) sun visor hooks (2) ceiling light (3) reading lamp (4) ceiling console (5) grab handles or plugs (6)

Partially separate:

door (7) frame gaskets jamb post coverings (8) center strut fittings (9)

Partially remove the door seal (10) from its clips.

Unscrew:

handles or plugs (11) ceiling light (12)

Partially remove the butterfly (13) inlet gasket.

NOTE / INFORMATION: The ceiling covering should be carefully treated to prevent any damage.

With the help of a heater device and a spatula, slowly remove the roof covering, starting from the windshield side.

Remove the upholstery from the back of the vehicle.

2 - REFITTING

Follow the sticking dimensions.

Apply a layer of synthetic rubber adhesive to the new or reusable coating.

Reposition the overlay correctly.

Continue inserting by following the reverse order of removal steps.

Clean the coating with soap and water or gasoline.

Haşim Ayaz hasimayaz@gmail.com